Discharge of septic tanks overflow error code - pampersa

To enter service mode:

1. Turn off the printer.
2. Press the button and holding RESUME include printer POWER button and hold it.
3. Release the buttons RESUME, and then press the button and release RESUME 2 more times. (POWER button still have to hold). All. Now you're in the service mode.

By clicking RESUME certain number of times you can select the desired action: (for example, if you click RESUME 4 times - will be made to counter the dumping of waste ink - "pampersa")

1 pressing - service / factory test printout, including ink sensor check
2 pressing - EEPROM info printout
3 pressing - EEPROM initialization
4 pressing - Clear the waste-ink counter
5 clicks - Printer model setting. (more selections beyond this-leave this alone)

After choosing the desired operation be sure to click POWER to complete action. After re-clicking POWER switch off the printer and will be ready to incorporate new already modified settings.

If the print head printer is out of order, then in the service mode indicator will blink all the time and discharge pampersa not help solve the problem.

Resetter Printer

Discharge of septic tanks overflow error code - pampersa

1. When a printer click RESUME, and then POWER.
2. Hold POWER - RESUME release and press it again 2 times, then release both buttons. (Every time when pressing RESUME - alternately blinks a green then orange).
3. In premiums initialization printer - flashing green light. When initialization end (indicator zasvetitsya continuing) - click RESUME 4 times (do not mix!).
4. Click POWER.

Resetter Printer

Discharge of septic tanks overflow error code - pampersa

1. Turn off the printer.
2. Hold the button click Resume POWER.
3. Hold the button POWER release RESUME.
4. Then press the button twice again RESUME.
5. Release all buttons.
6. Click RESUME 3 times - the indicator should be orange.
7. Turn the printer off button POWER.

Resetter Printer

Discharge of septic tanks overflow error code - pampersa

1. Power off printer
2. Hold Resume button then press and hold POWER, the beeper will sound once.
3. Hold POWER and release RESUME
4. Press RESUME twice and release the POWER button.
5. When the indicator lights steady, press RESUME three(3) times. The indicator should be orange.
6. Press Power to set data.

Resetter Printer

Discharge of septic tanks overflow error code - pampersa

1. Power off printer
2. Hold Resume button then press and hold POWER.
3. Hold POWER and release RESUME.
4. Press RESUME twice when led is on.
5. Release all buttons.
6. Press RESUME 4 times.
7. Press Power to set data.

Resetter Printer

Discharge of septic tanks overflow error code - pampersa

1. Open the lid, remove the cartridge, close the lid, unplug the power cord.
2. Click RESET paste and holding its power cord into a power outlet.
3. Release the RESET button and within 5 seconds, click on it again and again release.
4. Click and hold the RESET not less than 2 seconds and release.
5. If you want to - repeat last paragraph.

Resetter Printer

Discharge of septic tanks overflow error code - pampersa

1. Open the lid, remove the cartridge, close the lid, unplug the power cord.
2. Click RESET and keeping it connect the printer to the network, then release.
3. Click RESET again for 2 seconds and then release.
4. Repeat paragraph 3.
5. Turn off the printer.
6. Connect the food again, insert the cartridge.

Resetter Printer